215015
95
Revision A
1009140
CXXX
MXXX
BACKLIGHTING
D
C
A
B
Figure 4.13: Backlighting
5.
Press SELECT (D) until BACKLIGHTING is displayed on the
upper line.
•
Default setting is displayed on the lower line.
6.
Press left (B) or right (C) arrows to adjust display
backlighting.
7.
Press PROGRAM (A) to exit programming mode or press
SELECT (D) to proceed to next CAB DISPLAY SETUP? action.
4.2.5
Adjusting the Cab Display Contrast
1009099
CXXX
MXXX
WINDROWER SETUP?
NO/YES
A
B
Figure 4.14: CDM Programming Buttons
1.
Turn ignition key to RUN, or start the engine.
2.
Press PROGRAM (A) and SELECT (B) on cab display module
(CDM) to enter programming mode.
•
WINDROWER SETUP? is displayed on the upper line.
•
NO/YES is displayed on the lower line.
1009131
CXXX
MXXX
CAB DISPLAY SETUP?
NO/YES
B
A
Figure 4.15: Cab Display Setup
3.
Press SELECT (B) until CAB DISPLAY SETUP? is displayed on
the upper line.
•
NO/YES is displayed on the lower line.
4.
Press right arrow (A) to select YES. Press SELECT (B).
•
DISPLAY LANGUAGE? is displayed on the upper line.
