215676
305
Revision A
Indexing Reel Speed to Ground Speed
The reel speed on an A40D Auger Header can be configured so that it varies directly with the speed of the auger using the
header index function. Indexing the reel speed to the ground speed requires setting the minimum reel speed and
configuring the reel index setting.
1000793
A
B
C
D
E
Figure 4.308: Operator Console
DANGER
Ensure that all bystanders have cleared the area.
1.
First, set the minimum reel speed:
IMPORTANT:
Set the minimum reel speed while the windrower is stationary (that is, while the ground speed lever [GSL] is in the N-
DETENT position).
a.
Start the engine.
b.
Engage the header.
c.
Set HEADER INDEX switch (B) to ON.
d.
Press DISPLAY SELECTOR button (E) on the GSL, or press the FAST button (C) or SLOW button (D). The message
##.## MIN REEL will appear at location (A). The displayed value (##.##) represents the reel speed in rpm, mph, or
km/h, depending on how the cab display module (CDM) has been configured.
e.
Press FAST button (C) or SLOW button (D) until the desired minimum reel speed is achieved.
