215676
144
Revision A
1009330
CXXX
MXXX
ACTIVATE FUNCTIONS?
NO/YES
B
A
Figure 3.198: Functions
5.
Press SELECT (B) until ACTIVATE FUNCTIONS? appears on
the upper line.
•
NO/YES will appear on the lower line.
6.
Press right arrow (A) to select YES. Press SELECT (B).
•
ACTIVATE HEADER HT will appear on the upper line.
1009392
CXXX
MXXX
REEL DRV SPD XXXX
D 0 P 0
- +
D
D
B
A
C
E
Figure 3.199: Reel Drive
7.
Press SELECT (E) until REEL DRV SPD XXXX appears on the
upper line.
8.
Press and hold HAZARD (C) button.
•
Press left arrow (B) to decrease the reel speed.
•
Press right arrow (D) to increase the reel speed.
IMPORTANT:
Do
NOT
overspeed the reel.
NOTE:
Ensure that the reel drive is working properly.
9.
Release HAZARD (C) button. The reel will stop.
10. Press PROGRAM (A) to exit programming mode or press
SELECT (E) to proceed to the next header function option.
Testing Rotary Disc Drive Circuit Activate Function Using Cab Display Module
The cab display module (CDM) can be used to test the rotary drive circuit, rather than using the controls on the operator
’
s
station.
IMPORTANT:
Do
NOT
overspeed the rotary drive. Overspeeding can lead to vibration, belt failures, or other overspeeding-related
problems.
NOTE:
•
A rotary disc header must be attached to windrower to follow this procedure.
•
The engine must be running to perform this procedure.
DANGER
Ensure that all bystanders have cleared the area.
