215676
88
Revision A
1009131
CXXX
MXXX
CAB DISPLAY SETUP?
NO/YES
B
A
Figure 3.67: Cab Display Setup
3.
Press SELECT (B) until CAB DISPLAY SETUP? is displayed on
the upper line.
•
NO/YES will appear on the lower line.
4.
Press right arrow (A) to select YES. Press SELECT (B).
•
DISPLAY LANGUAGE? will appear on the upper line.
1009136
CXXX
MXXX
DISPLAY UNITS?
IMPERIAL
D
C
A
B
Figure 3.68: Display Units
5.
Press SELECT (D) until DISPLAY UNITS? appears on the
upper line.
•
The current setting will appear on the lower line.
6.
Press left arrow (B) or right arrow (C) to select either
METRIC or IMPERIAL.
7.
Press PROGRAM (A) to exit programming mode or press
SELECT (D) to proceed to the next CAB DISPLAY SETUP?
option.
Adjusting Cab Display Buzzer Volume
The volume level of the alert tones generated by the cab display module (CDM) can be changed by accessing the BUZZER
VOLUME sub-menu in the CAB DISPLAY SETUP menu.
1009099
CXXX
MXXX
WINDROWER SETUP?
NO/YES
A
B
Figure 3.69: CDM Programming Buttons
1.
Turn the ignition key to the RUN position, or start the
engine.
2.
Press PROGRAM (A) and SELECT (B) simultaneously on the
cab display module (CDM) to enter programming mode.
•
WINDROWER SETUP? will appear on the upper line.
•
NO/YES will appear on the lower line.
