215627
63
Revision A
Setting Windrower Tire Size and Wheel Type
The Harvest Performance Tracker (HPT) is factory-configured for 600/65R28 bar tires. If the windrower is equipped with a
different type of tire, you will need to change this setting. Setting the proper tire size ensures that the HPT accurately
tracks the windrower
’
s ground speed, the area cut, and other productivity data.
$
%
Figure 4.40: Tire Size
1.
Navigate to the SETTINGS menu with soft key 5 and the
HPT scroll knob. For instructions, refer to
Harvest Performance Tracker, page 60
2.
Scroll to WINDROWER SETTINGS icon (A) and select it.
3.
Scroll to TIRES icon (B), and select it to display the
adjustment window.
NOTE:
The F3 shortcut button on the operator
’
s console will also
cause the WINDROWER SETTINGS menu to appear.
$
%
Figure 4.41: Tire Selection
4.
Scroll to highlight appropriate tire size (A) and select it. The
new selection will be displayed with a shaded green radio
button.
5.
If the optional high torque wheel drives are installed, scroll
to the power wheel option and select HIGH TORQUE FINAL
DRIVES (B). The new selection will be displayed with a
shaded green radio button.
NOTE:
Do
NOT
select this option unless the high torque (36.82:1)
wheel drives are installed.
4.2.3
Checking Engine Speed
Check the idle speed and maximum speed of the engine to make sure it is running properly.
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
DANGER
Check to be sure all bystanders have cleared the area.
