215627
44
Revision A
If the oil level is too low, follow these steps to add oil:
$
%
Figure 4.8: Hood
5.
Move latch (A) toward the right cab-forward side of the
windrower.
6.
Grasp louver (B), and lift the hood to open it.
$
Figure 4.9: Oil Filler Cap
7.
Clean the area around filler cap (A) and remove it by
turning the cap counterclockwise.
8.
Carefully add oil using a funnel to achieve the desired level.
For oil specifications, refer to
IMPORTANT:
Do
NOT
overfill the reservoir with engine oil. Running the
engine with excess oil in the reservoir can result in
equipment damage.
Replace oil filler cap (A) and turn it clockwise until it is snug.
4.1.4
Checking and Adding Hydraulic Oil
The hydraulic system will not work correctly if the hydraulic oil level is too low or too high.
WARNING
Avoid high-pressure fluids. Escaping fluid can penetrate the skin causing serious injury.
