CAUTION
Do NOT allow tank to empty. Running out of fuel can cause air locks and/or contamination of the fuel
system. Refer to
Priming Fuel System, page 290 System Priming, page 290
1. Stop windrower and remove the ignition key.
2. Clean the area around the fuel
fi
ller cap (A).
3. Turn fuel
fi
ller cap (A) counterclockwise until loose.
Remove cap.
4. Fill tank with approved fuel.
For fuel type and
quantity, refer to
5.1.3 Lubricants, Fluids, and System
.
IMPORTANT:
Do
NOT
completely
fi
ll the tank as space is required
for expansion. A
fi
lled tank could over
fl
ow if exposed
to a rise in temperature, such as direct sunlight.
5. Replace fuel tank
fi
ller cap (A), and turn cap clockwise
until it clicks.
Figure 5.38: Fuel Tank Filler Cap
5.6.9 Filling the Diesel Exhaust Fluid (DEF) Tank
The fuel and DEF gauges low level warning light on the Harvest Performance Tracker display will signal the Operator
when DEF level is low.
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
214053
264
Revision A
Summary of Contents for M1240
