MacDon M1240, Operator'S Manual

Page: 270 / 488

MAINTENANCE AND SERVICING
Removing Water from Fuel System
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
1. Shut down the engine and remove the key.
2. Open the hood. Refer to 5.3.1 Opening Hood, page 244 .
3. Place a container under the fi lter (A) to catch spilled fl uid.
4. Turn drain valve (B) by hand 1-1/2 to 2 turns
counterclockwise until draining occurs.
5. Drain the fi lter sump of water and sediment until clear
fuel is visible.
6. Turn the valve clockwise to close the drain.
7. Dispose of fl uid safely.
8. Close the hood. Refer to 5.3.2 Closing Hood, page
245 .
Figure 5.32: Fuel System
5.6.3 Checking Hydraulic Oil
Hydraulic oil is used to transmit force under high pressure. The oil also lubricates, cools, and cleans the system,
thus the cleanliness and quality of the oil is highly important to ensure long system life. It is extremely important to
avoid contamination when service and regular maintenance is performed.
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
WARNING
Avoid high-pressure fl uids. Escaping fl uid can penetrate the skin causing serious injury.
1. Park windrower on level ground, and lower header and reel so that lift cylinders are fully retracted.
2. Shut down the engine, and remove the key.
214053
258
Revision A