MacDon M1240, Operator'S Manual

Page: 115 / 488

OPERATOR’S STATION
The performance information menu displays two columns:
one column displays the accumulated data over the
machine’s lifetime (A) and is not resettable, the other
displays the data accumulated per
fi eld (B) and is
resettable.
The performance information menu displays the following
information:
• Engine hours (C)
• Engine % idle time (D)
• Average % load (E)
• Gal/Hr (F)
• Acres (G)
• Acres/Gal (H)
• Gal/Acre (J)
• Windrower Header Hours (K)
NOTE:
To reset all of the fi eld values to zero, use the scroll knob
to highlight the FIELD column (B) and press the SELECT
button.
Figure 3.127: Performance Information Menu
3.17.8 F1 to F4 Function Buttons
The following functions have been assigned to the F1–F4
function buttons on the operator’s console:
• F1 (A) – Float menu
• F2 (B) – One-Touch-Return
• F3 (C) – Windrower settings
• F4 (D) – Header settings
Press a function button to override the existing screen and
display the function.
Press the function button again or press the Back button to
return to the previous screen.
Press the Home button to return to the run screen.
NOTE:
F5 and F6 buttons are not assigned to any functions.
Figure 3.128: Operator’s Console
Shortcut Buttons
214053
103
Revision A