215634
47
Revision B
3.4
Installing Drive Wheels
Be sure to check the wheel nut torque again once the windrower has begun operation.
CAUTION
Use a lifting device capable of supporting a minimum of 907 kg (2000 lb.) to lift the wheel assembly.
1026718
A
Figure 3.16: Windrower Keys Inside mVEC
1.
Retrieve windrower keys (A) from inside the chassis
multiplexed Vehicle Electrical Center (mVEC), and retrieve
the bag of wheel nuts from behind the operator
’
s seat.
2.
Clean the mounting surface on the wheel drive and the rim.
3.
For 540-65R30 tires, install the spacer on the wheel drive.
1036842
A
A
A
B
C
Figure 3.17: Drive Wheel
4.
M1170
NT5
Windrowers sold in Germany:
If replacing a rim
on a windrower equipped with a secondary set of brakes,
remove the spacer plate as follows:
a.
Remove two nuts (A) and bolts (C) attaching spacer
plate (B) to the inside of the wheel rim.
b.
Discard nuts (A), spacer plate (B), and bolts (C).
