215634
152
Revision B
1015082
A
B
C
Figure 4.87: A/C Controls
1.
Start the engine. Allow the engine to reach operating
temperature.
2.
If starting a machine that has been stored for more than
1 week, refresh the A/C system as follows:
a.
Press + (A) on the FAN SPEED switch to start the fan,
adjust temperature control (B) to the highest heat
setting, and press A/C switch (C) if necessary so that
the LED light is
NOT
lit.
b.
Move A/C switch (C) to the ON position. The A/C LED
will light up. Leave the A/C switch in the ON position
for 1 second. Move A/C switch (C) to the OFF position
for 5 to 10 seconds. Repeat this step 10 times.
1015084
A
B
C
D
E
F
Figure 4.88: Climate Controls
3.
Press AUTO FAN switch (A). The orange LED will light up.
Press RED TEMPERATURE CONTROL switch (B) until warm
air flows through the cab vents.
4.
Press BLUE TEMPERATURE CONTROL switch (C) until cool
air enters the cab.
5.
Press FAN SPEED switch (D) (+ or
–
) and note any change in
airflow in the cab. The AUTO FAN light should be off.
6.
Press RECIRCULATING AIR switch (E) and note any change in
airflow in the cab.
7.
Press WINDSHIELD DEFOG/DEFROST switch (F) and confirm
that the windshield vents are blowing.
4.2.10
Checking the Radio and Activating Bluetooth
®
Feature
M1 Series Windrowers are factory-equipped with a Bluetooth
®
-enabled radio and CD/DVD player. Ensure that the radio
’
s
basic features are working correctly.
1014920
A
B
Figure 4.89: Radio and Speakers
Radio (A) and two speakers (B) are factory-installed in the cab
headliner. The radio operates in AM, FM, CD/DVD, and USB
modes. It also supports Bluetooth
®
wireless technology audio
streaming and hands-free calling.
