214735
19
Revision A
3.2
Installing Caster Wheels
Some shipping configurations come with caster wheels removed. Follow this procedure to install caster wheels if
required.
1022761
A
Figure 3.4: Toolbox
1.
Retrieve toolbox (A) from the storage compartment, and
remove banding.
NOTE:
Use ignition key to unlock storage compartment.
2.
Retrieve hardware from the toolbox (A).
1018731
A
Figure 3.5: Windrower Rear
3.
Remove banding and blocking (A) securing walking
beam to frame.
4.
Retrieve caster wheel assemblies from shipment.
1022864
A
Figure 3.6: Lifting Windrower
5.
Using a forklift, approach windrower from the front and
slide forks under frame.
CAUTION
Ensure forks do NOT contact fuel tank (A) and that forks
lift on windrower frame.
6.
Raise windrower approximately 152 cm (60 in.) off the
ground. Place suitable stands under the drive wheel
legs and rear frame, and lower windrower onto stands
to partially unload the forks.