MacDon M105, Operator'S Manual

Page: 50 / 384

OPERATOR’S STATION
3.2 Operator Presence System
The Operator Presence System is a safety feature designed to deactivate or alarm selected systems when
the Operator is not seated at the operator’s station.
These systems include:
• Header Drive
• Engine and Transmission
3.2.1 Header Drive
• Requires the Operator to be seated in the seat in order to engage the header drive.
• Power is maintained to the header drive for fi ve seconds after the Operator leaves the seat, and then the header
shuts down.
• After the header has shut down automatically, the HEADER DRIVE switch must be moved to OFF position and
back to the ON position again to restart the header.
3.2.2 Engine and Transmission
• The engine will not start when the HEADER DRIVE switch is engaged.
• The engine will not start when the transmission is
NOT
locked in NEUTRAL.
• The engine will shut down when the windrower is moving at 5 mph (8 km/h) or less and the Operator leaves the
seat. The CDM will fl ash “NO OPERATOR” on the upper line and “ENGINE SHUT DOWN 5...4...3...2...1...0” on
the lower line accompanied by a steady tone. At “0”, the engine shuts down.
• If the Operator leaves the seat, and the transmission is
NOT
locked in NEUTRAL, after two seconds the lower
display will fl ash “NOT IN NEUTRAL”, and an alarm will sound.
169890
36
Revision A