MacDon M105, Operator'S Manual

Page: 214 / 384

MAINTENANCE AND SERVICING
If Fleetguard ES Compleat
®
is unavailable, use a coolant concentrate or prediluted coolant intended for use with
heavy duty diesel engines and with a minimum of the following chemical and physical properties:
• Is formulated with a quality nitrite free additive package.
• Provides cylinder cavitation protection according to fl eet study run at or above 60% load capacity.
• Protects the cooling system metals (cast iron, aluminum alloys, and copper alloys such as brass) from corrosion.
The additive package must be part of one of the following coolant mixtures:
• Ethylene glycol or propylene glycol base prediluted (40–60%) heavy duty coolant.
• Ethylene glycol or propylene glycol base heavy duty coolant concentrate in a 40–60% mixture of concentrate with
quality water.
Water quality is important to the performance of the cooling system. Distilled, deionized, or demineralized water is
recommended for mixing with ethylene glycol and propylene glycol base engine coolant concentrate.
IMPORTANT:
Do
NOT
use cooling system sealing additives or antifreeze that contains sealing additives. Do
NOT
mix ethylene
glycol and propylene glycol base coolants. Do
NOT
use coolants that contain nitrites.
Filter Part Numbers
Table 5.16 M105 Filter Part Numbers
Filter Part Number
Engine Oil Filter MD #111974
Charge Oil Filter MD #112419
31
Return Oil Filter MD #151975
32
Primary Fuel Filter Element MD #111972
Fuel Strainer Filter MD #111608
Secondary Fuel Filter Element MD #166312
Fuel Filler Filter MD #163989
Primary Element (CAB) MD #42445
Primary Air Filter Element MD #111954
Safety Air Filter Element MD #111955
31. Located on the return manifold, closer towards the rear of the windrower.
32. Located on the return manifold, closer towards the middle of the windrower.
169890
200
Revision A