MacDon M105, Operator'S Manual

Page: 188 / 384

OPERATION
Examples:
• Windrower is operating at 8 mph with HEADER INDEX ON and set at 1.5.
Display shows:
9.5 1.5 DRAP INDX
where
9.5
(8 + 1.5) is the draper speed in mph and
1.5
is the HEADER INDEX setting.
• Windrower speed drops to 7.5 mph at same HEADER INDEX setting.
Display shows:
9.0 1.5 DRAP INDX
where
9.0
(7.5 + 1.5) is the draper speed in mph and
1.5
is the HEADER INDEX setting.
• Windrower is operating at 8 mph with HEADER INDEX ON and set at 0.9.
Display shows:
8.9 0.9 DRAP INDX
where
8.9
(8 + 0.9) is the draper speed in mph and
0.9
is the HEADER INDEX setting.
Setting Draper Speed Independent of Ground Speed
Figure 4.180: Operator Console
A - Display B - Header Index C - Draper Fast
D - Draper Slow E - Display Selector
Set the speed of the draper independently of ground speed as follows:
NOTE:
This procedure can also be used to change the draper speed “on the go”.
CAUTION
Check to be sure all bystanders have cleared the area.
169890
174
Revision A