MacDon M105, Operator'S Manual

Page: 108 / 384

OPERATION
Engine Warning Lights
Four engine warning lights indicate abnormal engine
conditions.
Engine warning lights should
NOT
be
illuminated under normal operating conditions.
•
ENGINE PRE-HEAT
(A) illuminates yellow. Wait to start
engine.
•
WATER IN FUEL
(B) illuminates yellow. Service
recommended.
•
CAUTION
(C) illuminates yellow. Prompt attention is
required. Refer to display (E) for malfunction code.
•
STOP
(D) illuminates red. Stop engine immediately.
Refer to display (E) for malfunction code.
•
DISPLAY
(E) shows the malfunction code. For details,
refer to
8 Engine Error Codes, page 341
.
Figure 4.15: CDM
4.3.6 Windrower Operation
WARNING
The seat belt can help ensure your safety if it is used and maintained.
• Before starting the engine, securely fasten your seat belt. Ensure that anyone occupying the trainee’s
seat is secured by a seat belt as well.
• Never wear a seat belt loosely or with slack in the belt system. Never wear the belt in a twisted condition
or pinched between the seat structural members.
WARNING
• Avoid driving the machine with header removed. Removing header decreases the weight on drive
wheels, reducing steering control.
• If necessary to drive machine with header removed, use transmission field speed range, do NOT exceed
1500 rpm engine speed and avoid loose gravel and slopes.
• Never use windrower as a towing vehicle when header is removed, except as instructed in Towing Header
with Windrower, page 104 . There is insufficient weight on the drive wheels to provide steering control.
• Because of windrower shape characteristics, a roll-over protected (ROPS) cab is not required. If
operating with header removed, be aware that cab structure will NOT withstand a roll-over.
CAUTION
HYDROSTATIC STEERING
• Turning the steering wheel varies the hydraulic flow to one drive wheel relative to the other drive wheel.
• The reaction of this type of steering is different from conventional steering mechanisms.
169890
94
Revision A