Introduction
The Bluetooth
®
Software Interface kit (MD #208845) is required to update the master controller software on
M1 Series Windrowers. This document explains how to use this kit to perform software updates. Once the software has
been updated, the kit can be removed from the windrower and retained for future updates.
A list of parts included in the kit is provided in Chapter
.
Installation Time
Software update time is approximately 20 minutes.
Conventions
The following conventions are used in this document:
•
Right and left are determined from the operator
’
s position, facing forward with the windrower in cab-forward position.
•
Unless otherwise noted, use the standard torque values provided in the windrower operator
’
s or technical manual.
NOTE:
Keep your MacDon publications up to date. The most current version of this instruction can be downloaded from our
Dealer-only site (
) (login required).
NOTE:
This document is currently available in English only.
147867
i
Revision J
