MacDon HC10, Original Instruction

Page: 81 / 242

215126
59
Revision A
1005040
A
Figure 4.15: Header Stand
3. Lower header stand (A) to mid-position.
4. Detach the header from the windrower. Refer to the
windrower operator
’
s manual for instructions.
1005041
A
A
Figure 4.16: Forming Shield
5. Remove two lynch pins (A) securing the forming shield to
the header pins and remove the forming shield.
1030912
A
C
B
D
E
Figure 4.17: Hydraulic Hoses
–
Conditioner Drive
Motor
A - Case Drain B - Conditioner Motor Pressure
C - Deck Motor Return D - Deck Motor Pressure
E - Conditioner Motor Return
6. Disconnect the five HC10 hydraulic hoses from the header
at the following locations:
•
Case drain hose (A)
•
Conditioner motor pressure hose (B)
•
Deck motor return hose (C)
•
Deck motor pressure hose (D)
•
Conditioner motor return hose (E)
OPERATION