MacDon HC10, Operation And Parts Manual

Page: 70 / 156

OPERATION
15. Remove L-pins (A) from lift arms and back windrower
away from conditioner.
16. Replace L-pins in conditioner lift arms.
Figure 4.13: L-Pins
4.4.2 Detaching Hay Conditioner: Lifting Method
CAUTION
To prevent accidental movement of windrower, return GSL to N-DETENT, center steering wheel to lock,
shut off engine, and remove key.
To detach the hay conditioner from the header using the
lifting method, follow these steps:
1. Disconnect straps (A) from windrower frame.
Figure 4.14: Rubber Strap
2. Lower header stand (A) to mid-position.
3. Detach header from windrower. Refer to windrower
operator’s manual for instructions.
Figure 4.15: Header Stand
214033
60
Revision A