MacDon FlexDraper FD1 Series, Unloading And Assembly Instructions

Page: 81 / 354

214685
69
Revision A
5.2 Case IH Combines
5.2.1 Attaching Header to Case IH Combine
WARNING
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
Figure 5.18: Combine Float Module Upper
Left Side
1. On the upper left side of the combine float module,
remove nut (A), washer, spring, and lever (B).
Figure 5.19: Combine Float Module Upper
Left Side
2. Position lever (A) onto stud (B).
ATTACHING HEADER TO COMBINE