Adjusting Auto Reel Speed (Lexion 500 Series)
The preset reel speed can be set when the automatic header functions are activated.
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to
the combine operator’s manual for updates.
1. Use the < or > key to select REEL WINDOW. Window
E15 will display the current advance or retard speed of
the reel in relation to the ground speed.
Figure 3.261: Lexion Combine Display
2. Press the OK key (C) to open the REEL
SPEED window.
3. Use the – key (A) or the + key (B) to set the reel speed
in relation to the current ground speed. Window E15
will display the selected reel speed.
Figure 3.262: Lexion Combine Controls
4. Manually adjust the reel speed by rotating the rotary
switch to the reel position (A), and then use the – or +
key to set the reel speed.
Figure 3.263: Lexion Combine Rotary Switch
147831
172
Revision A
Summary of Contents for FlexDraper FD1 Series
