MacDon FlexDraper FD1 Series, Operator'S Manual, Page: 114 / 510

OPERATION
6. Position crop divider as shown by inserting lugs (A) into
holes in endsheet.
Figure 3.116: Crop Divider
7. Lift forward end of crop divider and install bolt (A) and
special stepped washer (B) (step towards divider).
Tighten bolt.
8. Pull at the tip of the crop divider and ensure there is
no lateral movement. If necessary, adjust bolts (C) to
tighten crop divider and eliminate lateral movement.
9. Close or install endshields. Refer to
3.2.3 Endshields,
page 31
.
Figure 3.117: Crop Divider
3.7.13 Crop Divider Rods
Crop divider rods are used in conjunction with crop dividers. The removable crop divider rods are most useful
when crop is down, but in standing crops, using only crop dividers is recommended.
Table 3.12 Crop Divider Rods Recommended Use
With Divider Rods Without Divider Rods
Alfalfa Lodged cereal Edible beans
Canola Peas Milo
Flax Soybeans Rice
Grass seed Sudan grass Soybeans
Lentils Winter forage Standing cereal
147831
96
Revision A