To remove the idler roller follow these steps:
1.
Raise the deck and engage the safety pin (A).
2.
Remove the front skid. Refer to
.
Figure 4.15: Safety Pin
3.
Loosen the draper.
NOTE:
Draper does not need to be removed, but
removal will ease roller disassembly. Roller
removed in illustration.
4.
Remove the idler roller (A) by removing bolt and
washer (B) at each end of the roller.
Figure 4.16: Idler Roller
To reinstall the idler roller (A), follow these steps:
1.
Reattach bolt and washer (B) at each end of the idler
roller (A). Torque bolts to 95 N·m (70 ft·lbf).
2.
Tighten the draper. Refer to
3.
Reattach the front skid. Refer to
.
Figure 4.17: Idler Roller
4.1.8
Replacing Draper Roller Bearing/Seal
To replace the draper roller bearing and seal, follow these steps:
1.
Remove the roller assembly. Refer to
214048
48
Revision A
Summary of Contents for DWA
