169784
46
Revision H
1011733
A
B
C
Figure 3.70: Reel Arm
–
Bottom View
4.
Route harness (A) to forward end of arm and make
connection (B) at light.
5.
Secure harness (A) to inside of reel arm with two clamps (C)
(MD #135233), 3/8 NC x 3/4 in. carriage bolts (MD #21863),
and smooth face lock nuts (MD #30228).
1011734
A
B
C
Figure 3.71: End of Reel Arm
6.
Place harness (A) and hoses in clamp (B) at aft end of arm
and secure inside arm with existing hex bolt (C) and nut.
3.12.4
Installing Splice
This modification is applicable to transport lights without a module that were manufactured prior to model year 2013.
The lighting harness at the endsheet transport light needs to be modified to include a splice at the 6-pin flat connector. For
more information, refer to
European (without Module, with Splice), page 51
1011770
A
B
Figure 3.72: Connector
1.
Locate the 6-pin flat connector (A) at the end of the header
portion of the electrical harness (B).
Summary of Contents for D65
