169784
39
Revision H
3.9
Checking Latch Alignment
To check the axle latch alignment, follow these steps:
1021627
A
B
C
Figure 3.54: Rear Fixed and Swing Axles
1.
Move the swing axle (A) to field position.
2.
Check alignment of latching system. Swing axle (A) should
freely engage latch (B) on fixed axle (C). If it does, skip the
remaining steps. If realignment is necessary, continue
through this procedure.
1021629
A
A
1021628
A
A
Figure 3.55: Rear Swing Axle
3.
Loosen latch bolts (A) (four per axle) to allow parts to
adjust position for best fit.
1021629
A
A
Figure 3.56: Rear Fixed Axle
4.
Loosen latch bolts (A) (four per axle) to allow parts to
adjust position for best fit.
5.
Latch axles together in field position.
Summary of Contents for D65
