169784
19
Revision H
3.2
Installing Header Electrical Harness
To install the header electrical harness, follow these steps:
1021609
A
B
Figure 3.10: Left Header Leg
1.
At the inside top of the left header leg, remove cap on
connector (A) and cut cable tie (B).
1021610
A
B
C
Figure 3.11: Front Axle
2.
Route connector (A) and wiring harness (B) under the leg to
the axle and through bracket (C).
A
B
C
E
D
1021611
Figure 3.12: Front Axle
3.
Orient clip (B) with notch (D) at top and insert
connector (A). Attach clip assembly to bracket (C) with two
1/4 x 1/2 in. self-tapping screws (E) and tighten.
Summary of Contents for D65
