5.4.3
Tensioning Timed Knife Drive V-Belts
1.
Loosen the two bolts (A).
2.
Turn
drawbolt
(B)
clockwise
to
tighten
or
counterclockwise to loosen belts (C) tension.
NOTE:
Tension is checked at mid-span of the belts.
The belts should deflect 5/32 in. (4 mm) with
12–17 lbf (52–77 N) of force applied to each belt.
3.
Tighten bolts (A).
Figure 5.12: Knife Drive V-belts
214017
60
Revision A
