215651
94
Revision B
$
%
Figure 3.67: Front Wheels
9.
Lift the wheel assembly to the desired height and slide
linkage (A) into the appropriate slot in the vertical support.
10. Push down on handle (B) to lock.
Moving Rear (Right) Wheels into Field Position
Perform the following procedure to move the rear (right) wheels into field position.
DANGER
To prevent bodily injury or death from the unexpected start-up or fall of a raised machine, always stop the engine,
remove the key, and engage the safety props before going under the header for any reason.
1.
Raise the header fully.
2.
Shut down the engine, and remove the key from the ignition.
3.
Engage the header
’
s safety props.
$
Figure 3.68: Rear Wheel
–
Right Side
4.
Pull pin (A) on the left rear wheel. Swivel the wheel
clockwise and lock with the pin.
