215184
414
Revision A
1018440
A
Figure 9.240: Direct Calibration Menu
NOTE:
Touch CALIBRATION icon (A) on the COMBINE MAIN MENU
page to display the CALIBRATION MENU where you can
choose from a variety of calibrations including header and
reel calibration.
Operating the Header
–
Gleaner S9 Series
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the combine
operator
’
s manual for updates.
1018443
A
B
C
D
Figure 9.241: Gleaner S9 Operator Controls
The following controls are used to operate the auto header
height control (AHHC) functions:
•
Tyton terminal (A)
•
Control handle (B)
•
Throttle (C)
•
Header control cluster (D)
Use the combine operator
’
s manual to familiarize yourself with
the controls.
1018468
A
B
Figure 9.242: Header Control Cluster
1.
With the header running, set lateral tilt switch (A) to
MANUAL.
2.
Engage the AHHC by pressing switch (B) upward to the
I
position.