1) Parts Required
2) General Information
• Depending on the type of crop and the height of the plants we recommend a distance
between the lifters of 1 foot (30cm) or every fourth guard tip
• The outside lifters need to be at least 1 foot (30cm) apart from the outside walls.
MacDon recommends the fifth guard tip
• To guarantee a proper function and avoid breakage always ensure the correct working
position of the lifters
• Please be aware of different lifter positions after resetting the header angle
• For proper mounting of the lifters please follow Step #3 of the instruction manual
3) Mounting of the crop lifter
Step 1
Select header width. (see appendix)
Step 2
Remove the existing bolts on marked crop
lifter positions.
Step 3
Choose suitable spacers.
Combines with standard tires = short spacer
Combines with tracks = long spacer
Step 4
Mount lifter with spacer & washer.
Note:
In all positions with hold down clips you only
a need a spacer and no washer.
Step 5
Lower the header to a working position and
check the position of the crop lifter.
Step 6
If needed, correct the position of the lifter by
using the other spacer.
Step 7
Once correct position is found mount all other
lifters.
Part Number
Description
Quantity *
255929
Crop lifter ASO-MacDon
1
per foot
255928
Spacer 11mm - 7/16’’ - 19mm AF
1
per foot
255927
Spacer 20 mm - 7/16’’ - 19mm AF
1
per foot
279575
Bolt - RHSN - 7/16’’ x 2,5’’
1
per foot
255930
Washer 4mm - 11,5mm ID - 18 mm AD
1
per foot
21761
Nu - Flange - 7/16’’ - AF 11/16’’
1
per foot
Not Sold Separately Mounting instructions crop lifter ASO-MacDon
1
AF = width across flats; ID = inner diameter; OD = outer diameter
1
Crop Lifter
Mounting Instructions
* Quantity based on header length
