MAC215986
48
Revision A
ϭϬϯϵϳϬϬ
A
A
B
C
Figure 3.37: Middle Linkage Cover
–
FD245 and FD250
Headers Only
4.
FD245 and FD250 headers:
Place middle linkage cover (B)
over flex linkage bracket and outboard linkage cover.
5.
FD245 and FD250 headers:
Install screws (A) and the nuts
(not shown) securing middle linkage cover (B) to the
bracket.
6.
FD245 and FD250 headers:
Install pin (C) through hole in
the tab that protrudes through the flex indicator.
3.2.6
Daily Start-Up Check
Perform these checks daily before attempting to operate the machine.
1001351
Figure 3.38: Safety Devices
CAUTION
•
Clear the area of bystanders. Keep children away from
machinery. Walk around the machine to be sure no one is
under, on, or close to it.
•
Wear close-fitting clothing and protective shoes equipped
with slip-resistant soles.
•
Remove potentially hazardous objects from the machine
and from the surrounding area.
•
Carry with you any protective clothing and personal safety
devices that could be necessary through the day. Do NOT
take chances. Personal safety devices that may be needed
include a hard hat, protective glasses or goggles, heavy
gloves, a respirator or filter mask, or wet weather gear.
•
Protect against noise. Wear a suitable hearing protection device such as ear muffs or ear plugs to protect against
objectionable or uncomfortably loud noises.
Perform the following checks before starting the machine:
1.
Check the machine for leaks and for any parts that are missing, damaged, or nonfunctional.
IMPORTANT:
Use the proper procedure when searching for pressurized fluid leaks. For instructions, refer to
2.
Clean all the lights and reflectors on the machine.
3.
Perform all daily maintenance. For instructions, refer to
