MAC215986
257
Revision A
1029279
A
Figure 3.403: Gauge Wheel
10. Turn front wheel assembly clockwise, 90°.
Moving Rear (Right) Wheels into Transport Position
When towing the header it must be converted into the transport position.
DANGER
To prevent bodily injury or death from the unexpected start-up or fall of a raised machine, always stop the engine,
remove the key, and engage the safety props before going under the header for any reason.
CAUTION
Stand clear of the wheels and release the linkage carefully; the wheels will drop suddenly once the mechanism is
released.
1.
Fully raise the skid shoe at the right transport axle. For
instructions, refer to
Adjusting Inner Skid Shoes, page 126
.
1032236
A
B
Figure 3.404: Gauge Wheels
2.
Adjust gauge wheel height to transport position
(lowest slot) as follows:
•
If in top slot, push on handle (A) to release.
•
If in mid slot, pull on handle (A) to release.
3.
Pull suspension handle (A) outward and push down on axle
pivot handle (B).
