MAC215986
255
Revision A
1034132
A
B
C
Figure 3.398: Left Wheel Assembly
5.
Remove lynch pin (A).
6.
Remove locking pins (B).
7.
Slide left wheel assembly (C) towards the back of the
header.
1034133
A
B
C
D
Figure 3.399: Left Wheel Assembly
8.
With the wheel facing out, slide left wheel assembly (C)
into storage bracket (D).
9.
Install locking pin (B).
10. Install lynch pin (A).
Moving Front (Left) Wheels into Transport Position
DANGER
To prevent bodily injury or death from the unexpected start-up or fall of a raised machine, always stop the engine,
remove the key, and engage the safety props before going under the header for any reason.
CAUTION
Stand clear of the wheels and release the linkage carefully; the wheels will drop suddenly once the mechanism is
released.
1.
Start the engine.
2.
Raise the header fully.
3.
Shut down the engine, and remove the key from the ignition.
4.
Engage the header safety props or support the header on blocks on level ground. If using blocks to support the header,
ensure the header is approximately 914 mm (36 in.) off the ground.
