MAC215986
233
Revision A
1024227
A
B
C
Figure 3.354: New Holland Combine Display
2.
Select SETTINGS tab (A). The SETTINGS page opens.
3.
From GROUP menu (B), select HEADER.
4.
From PARAMETER menu (C), select REEL VERTICAL
POSITION.
1023921
A
B
C
Figure 3.355: New Holland Combine Display
5.
Select GRAPH tab (A). The REEL VERTICAL POSITION graph
displays.
6.
Raise the reel to view high voltage (B). The voltage should
be 4.1
–
4.5 V.
7.
Lower the reel to view low voltage (C). The voltage should
be 0.5
–
0.9 V.
Setting Preset Cutting Height
–
New Holland CR Series
The cut height setting can be stored in the combine. When harvesting, the setting can be selected from the control handle.
NOTE:
Changes may have been made to the combine controls or the display since this document was published. Refer to the
combine operator
’
s manual for the most up-to-date information.
NOTE:
This section applies only to 2015 and later CR models (6.80, 6.90, 7.90, 8.90, 9.90, and 10.90). For other pre-2015 New
Holland combine models, refer to
