MacDon A40-D, Operator'S Manual

Page: 126 / 240

214804
112
Revision A
Lubrication Points: Drivelines
NOTE:
High Temperature Extreme Pressure (EP2) Performance With 1% Max Molybdenum Disulphide (NLGI Grade 2)
Lithium Base. To prevent binding and/or excessive wear caused by knife pressing on guards, do
NOT over-grease.
If more than 6 to 8 pumps of grease gun are required to fill the cavity, replace the seal in the knifehead.
Figure 4.9: Drivelines
A - Driveline Shafts (2 Places) (50 hours) - NOTE: 10% Moly Grease Is Recommended For Driveline Shaft Slip Joints ONLY.
B - Cross Shafts (2 Places) (50 hours)
C - Driveline Universals (2 Places) (50 hours) D - Driveline Universals (2 Places) (50 hours)
MAINTENANCE AND SERVICING