MacDon A30-D, Assembly Instructions Manual, Page: 31 / 56

UNLOADING AND ASSEMBLY
Form 169078 Revision C
31
B. A40-D
DANGER
Stop engine, and remove key from ignition
before leaving operator's seat for any reason.
A child or even a pet could engage an idling
machine.
a. Disengage rubber latch (A), and open driveline
shield (B).
b. Remove the cap (C) from electrical connector,
and remove connector from support bracket.
c. Disengage and rotate lever (D) counter
clockwise to “fully up” position to release the
hose bundle (E).
d. Move hose bundle (E) to header.
e. Rotate lever (D) clockwise, and engage in
bracket to store.
f. Route hoses (E) from windrower through
support (F) and access hole (G) in header frame
alongside hose bundle (H). Hose bundle (H) will
be attached later in the procedure.
g. Remove cover on header electrical receptacle
(J).
h. Push connector onto receptacle, and turn collar
on connector to lock it in place.
i. Attach cover to mating cover on windrower
wiring harness.
j. Remove caps from hydraulic couplers and clean
if necessary.
(continued next page)
A
B
D
E
D
C
E
G
H
J
E
F