Pressure Pump:
runs the air pressure pump.
Vacuum Pressure:
displays the current vacuum setting in inches of water (“H
2
O).
Pressing Proceed will update the display, so you can immediately see the result of
adjusting the regulator.
*Initial Ink Fill:
Printer production use only. To fill a printer in the field (at installation or any
other time), use the menu options found in Maintenance -> Printhead Procedures.
*Prep for Shipping:
Printer production use only. To prepare a printer that is already in
the field for shipping, use the instructions found in document 0706419,
Repackaging
Instructions.
Disable On-Head System:
selecting this option puts the printer in a non-printing state
that can be reset only by rebooting the printer.
* Service Calibrations
This submenu holds all of the service-level calibrations. The entire submenu is visible
only when the POD test has been enabled. Some calibrations do depend on other cali-
brations being completed properly first.
Touchscreen Calibration:
calibrates the control panel so that the location of
presses is accurately sensed.
Head Height Calibration:
This sets the rail height so that the carriage is the same
height from the belt across the width of the printer. Calibration requires a 0.070”
thickness gauge.
Media Thickness Sensor Calibration:
once the sensor has been adjusted to an
acceptable range of values, the printer moves the rail up and down repeatedly to
take sample readings. This calibrates the sensitivity of the sensor so that it ac-
curately detects different thicknesses.
Service Station Calibration:
This sets the height of the service station tray, finds
the leading edge of the printheads with the wiper head, and sets the left-to-right
position of the carriage over the wiper head.
UV Lamp Shutter Calibration:
allows the user to visually inspect and move the
UV shutters through control panel buttons so that the shutters are completely
open.
Printhead Y Calibration:
this initiates the interface for the manual adjustment of
the Y-axis alignment of the printheads.
5400 Technical Training Manual
MacDermid ColorSpan Confidential
Page 32 of 39
MacDermid, Inc. 11311 K-Tel Drive, Minnetonka, MN 55343
Phone: 952-944-9457 Fax: 952-944-8507
