17
MSID18-Li
Getting
Started . . .
Battery pack
Release / Attach
> Lock the ON/OFF switch (6) to avoid accidental starting by moving the forward /
reverse rotation control (5) into the middle position (see section “Product functions
– Forward / reverse rotation control”).
> To remove the battery, press the release button (9) and pull out the battery pack (8)
from the product (Fig. 2).
> To attach the battery to the product, align the battery pack (8) with the sliding slots of
the battery docking port and slide the battery pack in. Ensure it clicks in place (Fig. 3).
Fig. 2
Fig. 3
8
9
8
Charging the battery
WARNING!
Do not use any charger other than that specifically provided for
use with the product. Check the voltage! The voltage must comply with the
information on the rating label!.
NOTES:
If the battery pack is very hot you must remove your battery pack from the
charger and allow time for the battery to cool down before recharging.
The battery in your new tool is not charged when it leaves the plant. Therefore,
it must be fully charged before using the first time.
Please charge the battery to reach full or no less than half charge before
storage. If the tool will not be used for long periods of time, charge the
battery every 3-6 months.
z
Before you start
