manual utilizare presostat electronic
pressystem
22
4
PRIMA UTILIZARE - FIRST STARTUP
Dupa realizarea cu succes a legaturilor
hidraulice si electrice, puteti porni PresSystem
Este important ca la prima utilizare
sa se faca pornirea dispozitivului cu
toti
robinetii
instalatiei
inchisi.
Acest lucru permite PresSystem sa inregistreze
corect presiunea maxima ce va fi folosita in
instalatie. Inregistrarea presiunii maxime se
realizeaza dupa aprox. 40 secunde. Daca cele
40 sec. Nu sunt suficiente pentru umplerea cu
apa a instalatiei si atingerea presiunii maxime,
puteti tine apasat butonul
ON/OFF
pentru a
pastra pompa pornita pana la atingerea presiunii
maxime.
NB
: Daca presiunea instalatiei nu atinge macar
valoarea de 1 bar, dispozitivul nu va fi capabil sa
detecteze pragurile de presiune si intra in eroare.
After successful installation of hydraulic and
electrical connections, it’s possible to turn on the
PresSystem.
It
’s important that the first power on
of the device is made with all taps
closed.
This allows the PresSystem to be able to
correctly store the maximum pressure which will
be used for the system management. The
storage of the maximum system pressure occurs
after about 40 seconds. If this time is not
sufficient to fill the system and then to be able to
reach the maximum pressure, you can press and
hold the
ON/OFF
button to keep the pump on
regardless of the pressure reached.
NB
: If the system pressure doesn’t reaches the
value of at least 1 bar, the device is not able to
properly detect the pressure thresholds and goes
in error.
1. Cand porniti dispozitivul, va fi afisat numele
si versiunea software.
1. When you turn on the device, it will display
the name of the device and the version of the
software.
numele dispozitivului
– device name
versiunea software
– software version
