Mac Afric THEATG-002, User Manual

Page: 7 / 11

7

When removing paint., ensue that the work area is enclosed. Preferably wear a dust mask.

Do not burn the paint. Use the scraper and keep the nozzle at leaf 25 mm away from the
painted surface. When working in a vertical direction, work downwards to prevent paint from
falling into the tool and burning.

Dispose of all paint debris safely and ensure that the work area is thoroughly cleaned after
completing the work.
7 ASSEMBLY AND ADJUSTMENT
Prior to assembly and adjustment always unplug the tool
The air temperature can be adjusted to suit a wide range of applications. The table below suggests
settings for different applications.
Setting Applications
Ⅰ

Drying paint, varnish color shade samples, filler, adhesives, construction joints
and stucco forms

Drying wet timber prior to filling

Removing stickers

Joining adhesives-Large-surface gluing with contact adhesives, activation of
pressure-sensitive adhesives, acceleration of bonding processes, releasing of
bonding points as well as releasing or bonding of edge band or veneer.

Waxing and de-waxing

Shrinking PVC wrapping and insulation tubes

Defrosting of icy stairs and steps, door locks, trunk lids, car doors or water pipes,
as well as for defrosting refrigerators and ice boxes
Ⅱ

Welding of thermoplastic polymer, flooring materials of PVC and linoleum,
PVC-coated fabric, tarpaulins and foils

Bending plastic pipes and sheets

Soldering plumbing joints, tin, special silver solder, SMD elements, cable lugs

Loosening rusted or tightly fastened nuts and bolts

Removing old and even thick coatings of oil paint , lacquer, varnish and synthetic
plaster

Disinfection-With hot air of 600
℃
, you can quickly rid animal sties/stables of
bacteria .Woodworm infestation can be controlled ( Caution: Danger of fire! Do
not heat up the wooden surface excessively ).
If you are not sure about the correct setting, start with a low temperature setting
and gradually increase the temperature until you achieve optimum results
7.1 Mounting the correct accessory
（
if applicable
）
Icon Description Purpose