background image

   

WARNING: 

Be care of the danger of the kickback force on the spray assembly when opening the 

trigger gun and grasp the gun with hands firmly. 

 

WARNING:

 To reduce the risk of injury, close supervision is necessary when a machine is used 

near children. High-pressure cleaner shall not be used by children or untrained person. 

 

WARNING:

 Know how to stop the machine and bleed pressures quickly. Be thoroughly familiar 

with the controls. 

WARNING:

 

Stay alert and watch what you are doing. 

 

WARNING:

 

Do not operate the machine when fatigued or under the influence of alcohol or 

drugs. 

 

WARNING:

 

Keep operating area clear of all persons. 

WARNING:

 Do not overreach or stand on unstable support. Keep good footing and balance at all 

times. 

 

WARNING:

 

Follow the maintenance instructions specified in the manual. 

 

WARNING:

 

This machine must be grounded. If it has malfunction or breakdown, grounding 

provides a path of least resistance for electric current to reduce the risk of electric shock. The plug 

must be plugged into an appropriate outlet that is properly installed and grounded in accordance 

with all local codes and ordinances. The rating voltage (V/Hz) of the machine has to be in 

compliance with the local power supplying voltage. 

 

WARNING:

 

Check with a qualified electrician or service personnel if you are in doubt as to 

whether the outlet is properly grounded. Do not modify the plug provided with the machine. If it 

will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use any type 

of adapter with this machine. 

 

WARNING:

 

Use only 3-wire extension cords that have 3-prong grounding-type plugs and 3-pole 

cord connectors that accept the plug from the machine. Use only extension cords that are intended 

for outdoor use and the socket must be of watertight construction. These extension cords are 

identified by a marking "Acceptable for use with outdoor machines; store indoors while not in 

use." Use only extension cords having an electrical rating not less than the rating of the machine. 

Do not use damaged extension cords. Examine extension cord before using and replace if 

damaged. Inadequate extension cords can be dangerous. Do not abuse extension cord and do not 

yank on any cord to disconnect. Keep cord away from heat and sharp edges. Always disconnect 

the extension cord from the receptacle before disconnecting the machine from the extension cord. 

 

WARNING:

 

To reduce the risk of electrocution, don’t start and run the machine in the rain or 

storm. Keep all connections dry and off the ground. Do not touch plug with wet hands. It is 

strictly prohibited to let water leak into the machine. 

 

WARNING:

 

When the machine is turned on, the interior pumps start and continue to run even if 

the pressure wand trigger has not been depressed. Running the machine for more than 3 minutes 

without depressing the pressure wand trigger could cause heat damage to the motor and pumps, 

Summary of Contents for APW-VSA-150P













Reviews: