MABIS 04-237-001, Instruction Manual

Page: 12 / 27

21
Troubleshooting
1. Only use a soft, dry cloth to clean your blood pressure monitor.
2. Avoid using any types of liquids on the monitor or cuff.
3. Store your monitor in the provided storage case when not in use.
4. Do not store the unit where it will be exposed to direct sunlight, dust
or humidity. Avoid extreme temperatures.
5. Never disassemble the monitor or cuff.
6. Dropping or subjecting your blood pressure monitor to strong shocks
should be avoided.
Care and Maintenance
If any abnormality occurs during use, please check and correct the following:
Condition Correction
Display is blank when power is on. Check and correct the polarity
of the installed batteries. Reinstall
or replace batteries.
Measurement incomplete or Review and follow ‘Applying Your
abnormally low or high values Blood Pressure Cuff’ and ‘Taking
displayed. Your Blood Pressure Reading’
sections. Replace the batteries.
Measurements are different from Remember, blood pressure readings
those typically measured by are influenced by physical and
physician or every measurement mental conditions and/or even the
reading is different. time of day. Daily measurement
recordings should be interpreted by
your physician.
20
Description of Display Symbols
Consult a physician or trained
health care professional for
further information. Appears when there is an
irregular heartbeat detected
during measurement.
SYMBOL
CONDITION ACTION
Wait a minimum of 15 minutes
and remeasure. Loosen cuff to
allow blood circulation in the
wrist and hand while waiting.
Wait a minimum of 15 minutes
and remeasure. Loosen cuff to
allow blood circulation in the
wrist and hand while waiting.
Unit needs to be sent in for
repair or replacement.
Do not talk or move during
measurement. Review
‘Applying Your Blood Pressure
Cuff’ section.
Appears when an accurate
reading cannot be
obtained.
Appears when cuff is over
pressurized.
Appears when there is too
much movement during
measurement.
Appears when unit has
malfunctioned.