© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
6.4. Update Presets
You can modify the filter assignment for existing preset and update them.
Requirement:
.
1. Click
Edit Presets
and then click
Extended filter and preset config
.
2. Modify the filter assignment for the preset in the assigned port column.
3. Click
Save as preset
at the end of the port column.
The save presets pop-up opens.
Figure: Update Preset
4. Select in the drop down the preset you want to update.
5. Click
Update existing preset
.
The preset is updated with the new filter assignment and saved in the startup configuration.
6.5. Create New Filter
You can create 85 new filters, additional to the 43 predefined filters.
Important:
The combination of filter name, data type and addressing must be unique for each filter. If this data are
not unique, it is not possible to create a new filter.
Open Edit Filters pop-up
40
