© 2016 MA Lighting T e chno lo gy Gm bH | Da chde ck e rstr. 16 | D-97297 W a ldbütte lbrunn | Ge rm a ny
P ho ne +49 5251 688865-27 | suppo rt (a t) m a -do t2.co m | www.m a lighting.co m
1 of 1
Figure 1: Fixtures Sheet before store with StoreLook
Figure 2: Fixtures Sheet after store with StoreLook
Press
+
Store
(=StoreLook) and the respective executor button
.
All dimmer values are stored.
All attributes are stored if the dimmer value was bigger than 0.
For more information about the colors in the
, refer to
8.61. SyncEffects Command
This page describes the syntax and how to use the
SyncEffects command.
Important:
If you type the SyncEffects command in the console, by press and hold
+
Effect
(=SyncEffects),
the command will be directly executed.
You can also use the command line along with the virtual keyboard and type the word SyncEffects in.
To go to the SyncEffects command press and hold
+
Effect
(=SyncEffects) on the console.
The command will be directly executed.
Description
With the SyncEffects command, you synchronize all running effects.
457
