MA lighting dot2 XL-F User Manual Download Page 439

Page: 439 / 509

P ho ne +49 5251 688865-27 | suppo rt (a t) m a -do t2.co m | www.m a lighting.co m

1 of 1

8.47. Preset Command

This page describes the syntax and how to use the preset command.

To go to the preset command, press

Preset

on the console.

Description

With the preset command, you can e.g.

label a preset
apply presets to fixtures

Syntax

1. Label a preset.

Label Preset 1

2. Apply a preset to a fixture.

Fixture 1 At Preset 1

Example 1

Let´s assume, you will label dimmer preset 1 as "close".

1. Open the

dimmer presets pool

2. a) Press

Label

Preset

Please

2. b) Press

Label

and tap on preset 1 in the dimmer preset pool.

The

Enter Name for Window

opens.

Example 2

Let´s assume, you will apply color preset 2 (= red) to fixture 1.

There are two ways to do this:

a) Select fixture 1 in the

fixtures view

, open the

color presets pool

and tap on preset 2 (= red).

b) Press

Fixture

Preset

(= color presets pool)

(= preset 2 red)

Please

Preset 2 from the color preset pool is applied at fixture 1.

Summary of Contents for dot2 XL-F






























































































































































































































































































































































































































































































































Search results

Summary of Contents for dot2 XL-F

Reviews:

Brands by name

Popular brands

MA lighting dot2 XL-F, User Manual

Search results

Summary of Contents for dot2 XL-F

Reviews:

Brands by name

Popular brands