MA lighting dot2 XL-F User Manual Download Page 195

Page: 195 / 509

P ho ne +49 5251 688865-27 | suppo rt (a t) m a -do t2.co m | www.m a lighting.co m

1 of 1

Special Master - Program Time Icons

Additional to the normal executor icons are some special master - program time icons visible in the

executor bar

and in the

magic speed view

The special master - program time icons displays which function the program time master has.

On:

Turns the program time master on.

Off:

Turns the program time master off.

Trigger Icons

Trigger icons are visible in the

executor bar

for the main executor, in the

The trigger icons shows with which trigger the cue will be called.

Go:

Calls the cue by a go.

Time:

Calls the cue by a given time.

Follow:

Calls the cue after all times from the previous cue are executed.

Sound:

Calls the cue by a sound signal.

BPM:

Calls the cue by incoming BPM.

Timecode:

Calls the cue by incoming timecode time source. To select the timecode time source, go to the

Settings

of Executor window

7.3. Add New Fixtures Window

195

Summary of Contents for dot2 XL-F






























































































































































































































































































































































































































































































































Search results

Summary of Contents for dot2 XL-F

Reviews:

Brands by name

Popular brands

MA lighting dot2 XL-F, User Manual

Search results

Summary of Contents for dot2 XL-F

Reviews:

Brands by name

Popular brands