MA lighting dot2 XL-F User Manual Download Page 192

Page: 192 / 509

P ho ne +49 5251 688865-27 | suppo rt (a t) m a -do t2.co m | www.m a lighting.co m

1 of 1

Patch and Fixture Schedule Title Bar

All title bars starting from the Patch and Fixture Schedule are displayed in blue.

Figure 4: Patch and Fixture Schedule Title Bar

A blue title bar displays, that this is a mode in which the changes do not interact directly with the console.

They need to apply by a

Done

7.1.6. View Bar

Figure: View Bar

The view bar is located at the right side of screen 2 and all further screens.

In the view bar, you select the view of the screen.

The selected view has a gray background in the view bar.

There a six views to choose.

1. Fixtures

Tap to go to the

Fixtures View

, to see all your patched fixtures, attributes, and their values.

2. Groups

Tap to go to the

Groups View

, to see all stored groups for a quick selection of fixture.

192

Summary of Contents for dot2 XL-F






























































































































































































































































































































































































































































































































Search results

Summary of Contents for dot2 XL-F

Reviews:

Brands by name

Popular brands

MA lighting dot2 XL-F, User Manual

Search results

Summary of Contents for dot2 XL-F

Reviews:

Brands by name

Popular brands