R
EAL
T
IME
R
EPORTS
S
ECTION
C
HAPTER
3: A
LERTS
, L
OCKOUT
M
ANAGEMENT
M86 S
ECURITY
U
SER
G
UIDE
795
Lockout function
To set up the lockout function:
1. Click the checkbox corresponding to
Lockout
to activate
the Severity and Duration (minutes) fields.
2. Specify the
Severity
of the end users’ lockout:
•
Low
- Choosing this option opens the Low Lockout
Components accordion containing the Available Cate-
gories/Groups and Assigned Categories/Groups sub-
panels.
Select the library category/categories or protocol(s)
the end user should not access.
For bandwidth gauges, to specify a port number the
user should not access, type a specific value in the
Port Number
field, and/or use the up/down arrow
buttons to increment/decrement the current value by
one.
Click
Add
(for URL gauges) or
Add Port
(for band-
width gauges) to move the selection(s) to the Assigned
Categories/Groups list box.
TIP
: To remove one or more library categories/ports from the
Assigned Categories/Groups list box, make your selection(s), and
then click <remove to move the selection(s) back to the Available
Categories/Groups list.
•
Medium
- Choosing this option will lock out an end
user from World Wide Web access if he/she reaches
the threshold limit set up for the gauge.
•
High
- Choosing this option will lock out an end user
from network access via a TCP connection if he/she
reaches the threshold limit set up for the gauge.
3. Specify the
Duration
(minutes) of the lockout (the default
is “15” minutes), or click the “Unlimited” checkbox.
