Rev 02-21-2018 Page 1 of 6
www.m7speed.com
Ultimate MINI Performance
M7 Speed
149 Byers Creek Rd., Unit 103
Mooresville, NC 28117
888-438-5767
R60 Carbon Fiber & Tegris Splitter
(Model years 2011-2016)
PN 60-4M7601
Installation Guide
M7 Speed engineers and manufactures the highest quality and best fitting Mini Cooper
accessories and performance parts available anywhere on Planet Earth! Please inspect
your parts when you receive them to verify everything is included and no damage has
happened during shipment. Read these instructions completely BEFORE attempting to
install this product. If you are not confident you can do the work described or do not
have the tools or skills necessary please contact a local M7 dealer (listed on or website
) or a local automotive accessory installation center to perform this
work. We acknowledge not everything is perfect but we work very hard every day to
improve our products and make installations easier. If you have any comments please
contact M7 Customer Service directly at 704-663-0094. We encourage and welcome all
criticism Good or Bad. Thank you.
CONTENTS: Hardware Kit 90-1070
Qty
M7 P/N
Description
1
Splitter (Carbon Fiber or Tegris)
14
#12 Truss Head Self Tapping Screw (1 extra)
14
95-4001
Expanding Retainer-Black Plastic (1 extra)
1
95-9005
AVK Insert Tool #10-32
3
95-5002
#10-32 Expanding NutSert
2
95-9012
APR Strut Rod
4
95-3004-SS
#10-32 x 5/8" SHCS SS (Pre installed in strut rods)
6
95-7001-SS
#10 x 3/4" OD Flat fender washer
2
95-8019
#10-32 Half Height Nyloc Nut
TOOLS NEEDED:
•
#2 Phillips screw driver
(power nut driver
recommended)
•
Electric drill
•
1/8” drill bit
•
¼” drill bit
•
3/8” drill bit
•
3/8” open end wrench
•
Plastic body clip removal tool
•
7mm open end wrench
•
8mm open end wrench
•
5/32” Allen wrench
•
Red Loctite (Thread locker)
•
Tape measure
•
Masking tape
•
Silver Sharpie
•
A friend to help