TOPR_OPT_CAM32 Hardware Manual
M
2
I Corporation 6 / 9
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: +82-70-465-3366, Fax: +82-31-465-3355, www.m2i.co.kr
Chapter 5. installation
5.1 Installation Requirements
(1) Remove power to the unit.
(2) Please install between -10 ~ 50°C and 10 ~ 80%RH humidity.
(3) Ensure that the ambient temperature is not higher than the operating temperature.
(4) Do not tighten the screws with excessive force.
5.2 Installation Sequence
(1) Open the extension module option connector cover on the back of the main unit.
(2) After installing the extension module connector and the main module connector, tighten two screws with a
Phillips screwdriver.
(3) After completing, turn on the power of the main unit and check that the function works normally.
